Get a quote
A cedar deck on a Seattle hillside looking across Puget Sound toward the Olympic Mountains, wet from rain as the sun breaks through

Deck Builders in Seattle

What a deck costs here, what the city asks for, and what survives the rain.

Estimate your deck

$6,700 to $20,200

192 sq ft at $35 to $105 per sq ft

Ranges published by Seattle-area contractors, 2025-2026. A planning range, not a quote. Sales tax may be extra. See the sources

Get a quote for this deck
Old wet deck boards with moss in the gaps and rain hitting the surface

What a Seattle deck is up against

155 days

About that many days a year bring measurable rain at Sea-Tac, per NOAA's 1991 to 2020 normals. Every guide here starts from that.

18 inches The height above the ground at which Seattle asks for a deck permit, per SDCI.

2 to 8 weeks What contractors quote for permit review. SDCI says its lighter field-inspection permit typically takes a few working days, so ask which path your deck is on.

Before anyone quotes

Finding deck builders in Seattle is easy. Finding one who builds for a wet climate, handles the city's permit process and quotes honestly is harder. This guide is for homeowners planning a new deck or a full tear-out and rebuild. By the end you will know how to vet a builder, what drives the price, when a permit comes into play and which decking suits Seattle rain. Rainbreaks is an independent research desk, not a contractor.

  • Vetting: Confirm any builder's registration with Washington L&I's Verify a Contractor tool before you compare prices.
  • Price: Seattle contractors publish installed prices from about $25 to $105 per square foot, depending on material and source. Whole projects commonly run from about $7,000 to $35,000.
  • Permit: Seattle requires one for a deck more than 18 inches above the ground, and for any deck in an environmentally critical area, per SDCI.
  • Climate: Rain, shade, moss, drainage and slope change both the material you pick and the framing details you should ask about.
  • Quote: A fair quote gives footings, framing, flashing, decking, stairs, permit and haul-away their own lines.
A dark-shingled Seattle Craftsman house with a wood deck in the rain Wet wooden deck stairs going down into a mossy garden
A deck contractor pointing out joist hangers to a homeowner on a new deck frame

How do you vet deck contractors in Seattle?

Deck contractors in Seattle are builders who design, permit and construct new decks and full replacements, and in Washington they must be registered with the state Department of Labor & Industries (L&I). Look up a builder's registration, bond and insurance on L&I's Verify a Contractor tool before you compare quotes.

Registration is the floor, not the finish line. A builder can be registered and still be a poor fit for a wet, shaded or sloped site. Use this checklist before you book a quote visit:

  • Registration: The name on the quote matches the name on the L&I record, and the registration is active.
  • Itemized scope: Footings, framing, flashing, decking, guards, stairs, permit and haul-away each get a line.
  • Permit plan: The quote says who prepares drawings, who applies and who schedules inspections.
  • Local experience: Ask to see a deck the builder finished a few years ago in a shaded or sloped yard. Moss, movement and soft spots show up there first.
  • Written warranty: It states what is covered, for how long and who to call.

Get at least three quotes for the same size and material. Price gaps usually come from differences in what is included, so ask each builder to quote the same scope before you compare totals. Homeowners often post quotes online and ask whether the price is fair. The honest answer depends on the line items, which is why itemizing matters more than the bottom number.

What does it cost to build a deck in Seattle?

The cost to build a deck in Seattle depends mostly on size, decking material, height above the ground and how much work the site needs. Quotes from deck builders in Seattle can differ widely, and most of the gap traces back to the items below.

Seattle-area contractors publish installed prices of about $25 to $65 per square foot for pressure-treated lumber, $30 to $80 for cedar and $35 to $105 for composite, as of November 2026. Each figure is one source's range, and the spread is real.

Cost driver Why it matters in Seattle What the quote should show
Size and shape More area means more framing and decking; curves and angles add labor Square footage and layout
Height and slope Sloped yards need taller posts, bracing and sometimes drainage work Post count, height and footing details
Footings and framing Wet soil and rain exposure make sound footings and framing the long-term core of the deck Footing count and depth, lumber grade
Decking material Cedar, pressure-treated, composite and PVC differ in price and in how they handle damp Brand or grade and board size
House connection Water getting behind the ledger is a common failure point on wet-climate decks Flashing and attachment method
Permit and inspection Required for some decks, not all Who pays the fee and who handles it
Access and haul-away Tight sites and old-deck removal add labor Demolition and disposal line

Two Seattle conditions move the number more than homeowners expect. Slope adds taller posts, deeper bracing and sometimes retaining or drainage work. Moisture-ready details, such as flashing at the house wall and framing that sheds water, add labor but protect the frame.

When you compare quotes, check that each one names the material grade or brand, the footing count and whether the permit fee is included. A low quote that leaves these out is not cheaper, only incomplete.

Installed price per square foot, Seattle One bar is one source's published range, 2025 to 2026
Pressure-treated Pressure-treated, Tuff Deck Builders: $25 to $35 per square foot installed Tuff Deck Builders $25-$35 Pressure-treated, Craft Boys: $45 to $65 per square foot installed Craft Boys $45-$65 Western red cedar Western red cedar, Contour Fence & Deck: $30 to $45 per square foot installed Contour Fence & Deck $30-$45 Western red cedar, Craft Boys: $55 to $80 per square foot installed Craft Boys $55-$80 Composite Composite, Contour Fence & Deck: $28 to $45 per square foot installed Contour Fence & Deck $28-$45 Composite, Tuff Deck Builders: $35 to $55 per square foot installed Tuff Deck Builders $35-$55 Composite, Craft Boys: $70 to $105 per square foot installed Craft Boys $70-$105

Do you need a permit to build a deck in Seattle?

You need a deck permit in Seattle if the deck is more than 18 inches above the ground, is built on top of part of a building, or sits in an environmentally critical area such as a landslide-prone or flood-prone area, according to SDCI.

Seattle permitting has a reputation for being slow and confusing, so treat it as a project phase rather than a surprise. The Seattle Department of Construction and Inspections (SDCI) publishes its rules on its Decks page. Start there, then confirm details with your builder.

Expect the permit phase to involve these pieces:

  • A site plan showing where the deck sits relative to the house and property lines, plus elevation drawings and a signed checklist
  • Framing details, including footings and how the deck connects to the house
  • An application and a fee, from a few hundred dollars to about $2,500 by third-party estimates; SDCI's Fee Estimator gives the exact figure
  • Review. SDCI says it typically processes the lighter subject-to-field-inspection permit within a few working days of filing, while contractors quote roughly 2 to 8 weeks
  • Inspections during and after construction

Ask your builder who pulls the permit and who is present at inspections. Get that answer in the contract. An unpermitted deck can raise questions when you sell or insure the home, so skipping the step to save time is rarely a bargain.

Deck framing plans held down on a table under a porch roof, with rain falling past the edge
String lines and stakes marking a future deck on a sloping Seattle backyard, with a couple looking on

How should you plan a deck for a wet, sloped Seattle lot?

Planning a deck in Seattle works best when you settle drainage, shade and slope before you pick a color or a layout. Many homeowners want to build a deck in Seattle's drier months, so talking to builders early also gives you room to schedule.

Work through these questions first:

  • How will you use it? Dining, a grill, a hot tub or a quiet corner each need different sizes and structure.
  • Where does the sun reach? Shaded decks stay damp longer, which favors moss and mildew on the surface.
  • Where does water go? Roof runoff, downspouts and the yard's grade should send water away from the footings and the house.
  • How steep is the lot? Slope sets post height, stair length and bracing.
  • How will the crew get in? Narrow side yards and steep access raise labor costs.

Once you know the answers, the project follows a predictable order:

  1. Define the size, use and budget range.
  2. Verify L&I registration and collect three itemized quotes.
  3. Confirm with SDCI whether your deck needs a permit.
  4. Choose the decking and the framing details.
  5. Sign a written contract with scope, schedule and payment milestones.
  6. Build the deck and pass the required inspections.
  7. Walk the finished deck with the builder and note anything to fix before final payment.

Which decking holds up best in Seattle rain?

  • A newly built pressure-treated deck behind a modest Seattle rambler

    Pressure-treated

    The lowest upfront price. Expect boards that dry, check and need cleaning over the years.

  • A western red cedar deck beside a Seattle bungalow after rain

    Western red cedar

    Naturally decay-resistant and softer underfoot. It weathers to silver gray and holds moss in shade.

  • A finished gray composite deck behind a Seattle townhouse

    Composite

    Resists rot and asks for the least upkeep, at the highest upfront price. Deep shade still grows mildew.

The best decking in Seattle is the material that tolerates constant dampness, shade and moss without softening or warping. No single option wins on every count, so the table compares the four common choices.

Material How it handles Seattle damp Care to expect Watch for
Cedar Naturally decay-resistant, softer surface Cleaning; weathers to silver gray Dents, moss in shade
Pressure-treated lumber Treated to resist rot and insects Cleaning and checking for cracks Cupping and warping as boards dry
Composite Resists rot; blend of wood fiber and plastic Regular cleaning Surface mildew in deep shade; compare warranties
PVC Contains no wood and resists moisture Cleaning Higher price; fewer look options

The surface is only half the story. Even a composite deck usually sits on a wood or metal frame, and the frame is where moisture damage starts. Ask what the joists, beams and posts are made of, how the ends are protected and how water drains off the structure.

Once you choose a material, ask each builder for the product name and warranty terms in writing. For cost differences between materials, see the cost section above.

A timber-framed covered deck on a dark-sided Seattle house, dry under the roof while rain falls past the eave

Is a covered deck worth it in Seattle?

A covered deck in Seattle keeps rain off the surface for much of the year, but it is a bigger structure than an open deck. That changes the framing, the permit question and the price.

Here is what a roof adds to the project:

  • Heavier structure: Posts and beams carry roof loads, which can mean larger footings.
  • Roof connection: Where the roof meets the house wall needs careful flashing.
  • Runoff: Roof water needs gutters or another path away from the footings.
  • Less drying: Shade under a roof keeps nearby surfaces damp longer, so moss can still appear.
  • Light: A roof can darken the rooms behind it.

SDCI's Decks page does not say how a roof over a deck is treated, so ask SDCI whether adding one changes the permit. A covered deck suits households that want to use the space through the wet months. If you mainly want summer use, an open deck may be enough.

A crew tearing out an old moss-stained wood deck behind a Seattle bungalow

When does deck replacement make sense in Seattle?

Deck replacement in Seattle makes sense when the frame, the house connection or the footings have reached the end of their life, not only the surface boards. A full replacement is a new build on an existing footprint, so it deserves the same vetting and quoting discipline as a new deck.

These signs point to a full replacement:

  • Joists or posts that feel soft or crumble near the ground
  • A ledger board pulling away from the house, or corroded hardware
  • A deck that wobbles, sags or slopes toward the house
  • Footings that have shifted or settled

Before you sign, ask the builder to list in writing which existing parts, if any, will be reused. Footings are the usual candidate. Confirm that the quote includes demolition, haul-away and disposal. Do not assume the old deck's permit status carries over. SDCI's Tip 316 says replacing part of a structure built without a permit does not count as a repair, and that proving it was legal is on you. Look up past permits early, and have your builder confirm what a replacement requires.

From request to quote

  1. A homeowner on an aging deck looking at a phone, with light rain behind

    Right now. Tell us your ZIP, the scope and how to reach you. Two minutes, no account.

  2. A person on a phone call at a kitchen counter with a calendar

    Usually within one business day. A quick call schedules your quote at a time that suits you.

  3. A contractor measuring an existing deck while the homeowner watches from the doorway

    At your house. A registered Seattle-area contractor sees the site and quotes the job. Check it line by line against the guides here.

Deck Builders in Seattle FAQ

Free for homeowners. Partner contractors pay us for introductions. We are a research desk, not a contractor.

How do I find deck builders near me in Seattle?

Start with Washington L&I's Verify a Contractor tool to confirm registration, then collect three itemized quotes for the same scope. Ask each builder for a deck they finished a few years ago on a shaded or sloped site.

Is my Seattle deck quote reasonable?

A quote is reasonable when every major item has its own line and the scope matches the other quotes you hold. For a market range, compare it with the published per-square-foot figures above. Do not judge by the total alone.

Do I need a permit to build a deck in Seattle?

Yes, if the deck is more than 18 inches above the ground or in an environmentally critical area, per SDCI. Check SDCI's guidance on decks or have your builder confirm in writing before work starts.

Are pressure-treated decks good in the Pacific Northwest?

They can be, when the lumber is rated for the exposure and the deck drains well. Expect the boards to dry, check and need cleaning over the years.

Composite or cedar: which is better for Seattle rain?

Neither wins on every count. Composite resists rot and needs less upkeep, while cedar is a natural wood that weathers to silver gray and needs more care.

How long does it take to build a deck in Seattle?

Building a standard deck takes about 3 to 7 days once work starts, by contractor estimates. SDCI says it typically processes the lighter permit within a few working days of filing, while contractors quote roughly 2 to 8 weeks of review. Ask your builder for a written schedule that separates permit review from construction.

Get a quote
A tall second-story deck on posts on a steep Seattle hillside lot Rain dripping through the narrow gap between two deck boards

Checked against

City of Seattle SDCI · Seattle Residential Code · SDCI fee schedule · Washington L&I, Verify a Contractor · NOAA climate normals · Craft Boys · Orca Roofing · Contour Fence & Deck · Tuff Deck Builders · Olympic Decks · Pro Complete Construction · In Real Construction · Deck Builder Seattle · Kolmo · Angi

Official sources on this page

Maren Holt

Signs Rainbreaks' research on Seattle deck costs and permits. It is the desk's shared byline: researchers, not contractors.

About the byline Where the numbers come from Report an error

Jonathan Gill

Seattle-area contractor with Metro Construction Services. Read this guide and approved it before it went out.

About Jonathan

A wood deck with two chairs on a Seattle hillside at the end of a rainy day, with low sun over the city

Get a deck quote that spells out the scope

Tell us about your Seattle deck project. A quick call schedules your quote with a Seattle deck contractor, with footings, framing and permit listed line by line.

Next step: get a quote you can compare

Choosing among deck builders in Seattle comes down to four checks: an active L&I registration, an itemized quote, a clear answer on the permit, and details built for rain. Use the guides above to size your project and shape your questions. Then use the quote form on this page to schedule a quick call and get a quote that spells out the scope.